top of page

How to Boost Wi-Fi Signal Strength At your Home – 7 Simple Hacks

The current generation is totally depending on Internet in order to complete their day-to-day activities. Now-a-days, most of the devices being launched into the market supports Internet. If you have a desktop, laptop and a smartphone, you can connect to Internet using Wi-Fi which is nothing but Router. Using a single router, you can use internet on any device which is near to it. Wi-Fi is one of the most beneficial and important parts of using a computer.


On the other side, usage of Wi-Fi is very frustrating because of low signal strength. It is the most dreadful situation when your Wi-Fi signals at home consistently drops due to slow speeds, bad reception, and other Wi-Fi issues. But, keep in mind that there is no mistake in your Wi-Fi router. Actually, it’s your mistake in placing the Wi-Fi router in a wrong place. How to overcome this problem and boost up Wi-Fi signal Strength at your Home? Don’t worry! We are presenting your 5 easy ways to increase or boost your Wi-Fi Signal strength at your home along with a video. Have a look!

  1. 7 Easy Ways to Boost Wi-Fi Signal Strength at your Home

  2. 1. Place your Router in a Perfect Spot

  3. 2. Lift the Router off the Ground

  4. 3. Keep the Router away from other Electronic Appliances

  5. 4. Point the Antennas in Different Directions

  6. 5. Measure your Wi-Fi Signal Strength

  7. 6. Control Bandwidth-Hogging Applications

  8. 7. Secure your Wi- Fi Router Password

7 Easy Ways to Boost Wi-Fi Signal Strength at your Home

Wi-Fi known as Wireless Fidelity allows various devices like computers, laptops, smartphones and other devices to connect to the Internet or communicate with one another wirelessly within a particular area (eg: within a building). Generally, Wi-Fi waves are just radiowaves which are similar to slectromagnetic waves that helps to pick up with your mobile phone or a radio. Compared to other radio waves, Wi-Fi waves are very short that provides signals for the devices which are present at 12 cm away from the router.

If you move your device much farther from the router, the signal gets a lot weaker. They provide good signal strength if the device is placed within 150 feet from a single router and can’t go beyond that distance. Router placement is very much important and shows huge difference in how strong your signal strength is around your house. Here are the seven easy ways how to increase or boost up Wi-Fi signal strength at your home.

1. Place your Router in a Perfect Spot

How to boost Wi-Fi signal strength at your Home

Router placement is very important which is responsible for getting proper Wi-Fi signals. Make sure that, you must definitely place the router near the center of your house so that it broadcasts the signals out in all directions with equal strength. Don’t place the routers within a closed room or behind the the TV cabinet or walls. This is because, if the router is placed behind a wall, it blocks some signal that eventually results in bad signal strength. If you want the best signal, you’ll need to place it in the open, free of any walls and obstructions.

  1. Use Aluminium Foil to boost your Signal Strength at home.

2. Lift the Router off the Ground

Lift the Router off the ground

If you want better signals, you need to lift your router up off the ground. If you place your router on the ground, the signals can’t penetrate from some materials which with the floors are made up of such as metal, cement and concrete. Generally, most of the routers are designed in such a way that they broadcast the Wi-Fi waves slightly downwards. So, if you place it on the ground, then you’re projecting the signals towards the ground.

Place routers on a table not on the ground

Make sure that you place the router above the ground at a decent height on any table so that the signals will spread across your house evenly and you can enjoy browsing your net with pretty much speed.

3. Keep the Router away from other Electronic Appliances

Keep Router away from electronics

Electronics such as Television, remote controls, computers, Security alarms, cordless phones, microwaves and any other device which has a motor within it can interfere the Wi-Fi router’s signals. Even one router can cause interference to other routers. So, always keep your router away from the other electronic appliances.

Place router away from electronic appliances

4. Point the Antennas in Different Directions

Usually, Routers have two antennas and some others, we can see more than two antennas in them. If you place the antennas in different directions, the signals can spread across the house equally so that you can get good Wi-Fi signal strength.

Point antennas in different directions

You could position two antennas, one in vertical direction and the other in a horizontal way that looks like perpendicular manner.

Place router antennas perpendicularly

Devices work best when their internal antenna is parallel with the router and this is the reason most antennas in laptops are horizontal.

Antenna signal depends on how you hold your mobile

But, in case of any mobile device or tablet, it entirely depends on how you’re holding the device. So, you have the highest chance of increasing your Wi-Fi signal strength if you have your Router antenna one horizontal and one vertical.

5. Measure your Wi-Fi Signal Strength

Whenever you find that your networks in not working properly, then you can measure your signal strength using some applications which are available to download them on your phone. There are many apps available that can be downloaded on your mobile phone so as to measure your Wi-Fi Signal Strength. You can download the apps and easily measure your Wi-Fi signal strength through your mobile device.

Wifi Analyzer-measure Wi-Fi Signal Strength

Wifi Analyzer is a mobile app that helps you to find a less crowded channel for your wireless router. You can install it on your mobile device to find signal strength of the wi-fi signal around your house.

Install Wi-Fi Analyzer

6. Control Bandwidth-Hogging Applications

Sometimes, even some applications like video chats, playing online games, torrents files, or using services like Netflix can drop your Wi-Fi signal strength drastically. All such applications can hog your network bandwidth that eventually leads to slower internet. Try to avoid or control bandwidth hogging applications.

control bandwidth hogging apps

7. Secure your Wi- Fi Router Password

It happens that, sometimes your wi-fi speed reduces due to some other people nearby your house may hack your router password and use your internet. There are simple ways to hack Wi-Fi network and there are some ways to find out if someone is stealing your Wi-Fi. The best way is just lock them out with better security. It is essential to use WPA password, but even those can be cracked pretty easily. So, protect your network using by following simple techniques. These are the seven simple ways to boost Wi-Fi signal strength at your home. Hope this tutorial helps you to increase your Wi-Fi signal strength in the best way.

  1. Must Read: Turn your router into a highly functional one.

1 view0 comments
bottom of page